SBC
- Low budget series with Intel® 9th Gen Celeron®
- Long term programs: 10 years or more
- Expansions for I/O, storage, XMC, M.2 flash
- Intel® Atom™ E38xx processors, up to quad-core 1.91 GHz
- Up to 8 GB 1333 MHz soldered DDR3L memory
- Design optimized for the extended temp. range - fanless up to +85°C
- CFast or soldered SATA Flash as boot device
- Comprehensive I/O capabilities: DisplayPort, USB 3.0/2.0, Gigabit Ethernet, SATA, CAN, Audio ...
- Fully EN50155 compliant
- 19“ subrack system, 4U, 84HP, 235mm depth
- 19“support brackets tox-cold welded with side panel, double screw fixing for horizontal rails (according to EN50155 incl. shock and vibration)
- Board size 100x160mm, 3U front panel
- Air flow from bottom to top
- 3x Axial fan 119x25mm, 12V DC, fans not extractable
- 2x Power bus CPCI-Serial 1 Slot
- Redundant power supply operation
- 3x Backplane CPCI-Serial /PICMG CPCI-S.0: 4 Slots; Full Mesh; System slot right; Without Rear I/O
- Main filters: Top and bottom cover perforated
- Rear hood
- Shielded version
- AC input, accessible from the rear
- AC-wiring
- Top and bottom cover perforated
- Shielded version
- Including 2x 500W Power supply
- Input Range 90 – 264VAC Environmental
- OutputSpec- 12@42A, 5V Standby @ 2.5A
- 19-inch rack with a CompactPCI® 32-bit backplane
- System slot suitable for 3U CompactPCI® classic or CompactPCI® PlusIO CPU card
- 13 peripheral card slots 32-bit 3U/4HP
- Backplane equipped with PCI® to PCI® bridge (6 primary + 7 secondary peripheral slots)
- Pluggable AC power suppy 250W, wide input range
- Dimensions 4U/84HP 448.9mm x 221.5mm x 315.5mm (W x H x D)
- Integrated fans
- CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
- Backplane communication via CompactPCI® J1 and J2 hard metric connectors
- J1 Connector for PICMG® CompactPCI® 32-Bit Support
- J2 Connector for CompactPCI® PlusIO support (PCIe®, SATA, USB2)
- J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachment
- J2 Connector option available for 64-bit system slot (legacy CompactPCI® 2.0 Classic)
- Side cards and low profile mass storage modules available as COTS and also as custom specific
- 19-inch rack with CompactPCI® Serial and CompactPCI® Express (PXIe™) backplanes
- Two pluggable AC power supplies 550W in total, wide input range
- Dimensions 482.6mm x 177mm x 282mm (W x H x D), 4U/84HP
- Bottom mount fan unit
- PICMG® CompactPCI® Serial backplane
- Suitable for CompactPCI® Serial cards 3U/4HP, IEEE card guide rails
- 1 x CompactPCI® Serial system slot (CPU card) right aligned
- Recommended CPU card SC5-FESTIVAL or SC9-TOCCATA
- 6 x CompactPCI® Serial peripheral slots (I/O and mass storage cards)
- PICMG® CompactPCI® Express (PXI Express™) backplane
- CompactPCI® Express system slot (bus coupler board) left aligned
- Required bus coupler ECX-PCIE (mezzanine card on top of CPU board)
- 7 x CompactPCI® Express (PXIe™) hybrid peripheral slots
- For long-term programs in harsh environments
- 11th Gen Intel® Xeon® 2.1GHz sixcore CPU
- Proven CPCI ecosystem
- European design and production
- CompactPCI® Serial (PICMG® CPCI-S.0) CPU Card
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O connectors for typical system configuration (3 x 10Gbps USB Type-C DP Alt Mode, 3 x 2.5Gbps Ethernet RJ45)
- Backplane communication via PCI Express® Gen3, SATA 6G, USB 3, Gigabit Ethernet
- New AirMax VSe® backplane connectors up to 25Gb/s differential pair
- On-board PCIe® mezzanine expansion option for mass storage modules or side cards
- Side cards and low profile mass storage modules available as COTS and also as custom specific
- CompactPCI® Serial (PICMG® CPCI-S.0) System Slot Controller
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
- Front panel I/O for versatile system configuration (3 x USB3/DisplayPort, 3 x 2.5Gbps Ethernet)
- Backplane communication via CompactPCI® Serial connectors
- On-board PCIe® mezzanine expansion option for mass storage modules or side cards
- Side cards and low profile mass storage modules available as COTS and also as custom specific
- 7 slots, 32-bit / 33 MHz, system slot right, rear I/O, 3.3 V/5 V I/O
- 300 W PSU, 90–264 VAC, switch + EMI filter
- Outputs: 3.3 V/25 A, 5 V/25 A, +12 V/7 A, –12 V/2 A
- Fixed bottom fan tray, 2 × 12 V fans, bottom-to-top airflow
- 4U × 42HP × 278 mm, desktop form factor
- IEEE 1101.1/10/11, IEC 60297-3; MIL-STD-810F; EN 50155