IoT Gateway
- Easy to set up and maintain long distance ( up to 2,000 meters )
- 9 ～ 48 V wide DC input range
- Supports Modbus TCP to RTU conversion
- Support the MQTT protocol ( available in NBIoT model )
- Versatile interfaces with RS232, RS485, DI/DO for connection to sensor and field devices
- Broadcast mode (no pairing required)
- Fast response (no need to wait 50-150 seconds)
- Up to 255 Bytes per packet
- Receiving sensitivity: -137 dBm
- Secured AES encryption in wireless communication
- Web-based management and remote firmware image upgrade
- NXP i.MX8M Plus Cortex®-A53 quad core processor
- Embedded Neural Processing Unit (NPU) delivers up to 2.3 TOPS AI performance
- 1 x HDMI
- 1 x USB 3.0, 1 x USB 2.0
- 1 x COM
- 2 x GbE LAN ports
- 1 x Full-size mini-PCIe for optional Wi-Fi/BT/4G LTE (PCIe 3.0, USB 2.0, SIM)
- 1 x Internal M.2 2230 Key E (USB 2.0, SDIO, UART)
- Modular rear I/O design for easy customization
- Support 9~30V DC input
- TI Sitara™ AM3352 Cortex®-A8 800MHz processor
- 1GB of DDR3-800 and 8 GB of eMMC NAND Flash onboard
- 2 Gigabit Ethernet ports
- 2 RS232/485, 1 USB OTG, 6 GPIO
- WiFi/BT/LTE solution ready
- Yocto Linux support
- -20 ~ 70 °C operating temperature/ 12~24V DC power supply
- Equipped with hardware watchdog timer for system protection
- Onboard Intel® Atom™ processor E3826 dual core, 1.46GHz
- 1 x HDMI Display
- 2 x Intel® I210AT GbE LAN ports; Support WoL, Teaming and PXE
- 4 x USB 2.0
- 3 x mini-PCIe sockets for optional Wi-Fi/3.5G/LTE modules
- 1 x RS232, 1 x RS232 (only Tx/Rx/GND), 1 x RS422/485 with auto flow control
- Support -10°C to 60°C operating temperature
- Support 24V DC input
- Onboard Intel® Celeron® processor J3455 Quad Core, 1.50GHz
- 3 x HDMI
- 6 x USB 3.0, 2 x USB 2.0
- 1 x RS232/422/485, 3 x RS232
- 3 x Intel® I210 GbE LAN ports; support WoL, teaming and PXE
- Onboard TPM 2.0 chip
- 2 x mini-PCIe socket support optional mSATA/Wi-Fi/BT/4G LTE module
- Support operating temperature from -10°C to 60°C
- Support +9V to 30VDC input; support ATX power mode
- Onboard Intel® Celeron® processor J6413 Quad Core 1.8GHz
- 1 x DP++ and 1 x HDMI for dual independent display support
- 1 x Intel® 2,5GbE LAN port, support WoL & PXE
- 2 x Marvell PHY GbE LAN ports, support WoL
- 2 x RS232/422/485 with auto-flow control and 2.5KV isolation protection
- 2 x USB 3.0, 4 x USB 2.0
- 1 x Front access 2.5” SATA HDD/SSD tray, support ComboStorage (2.5” SSD + MicroSD card)
- 2 x mini-PCIe socket support optional modules and mSATA device
- 1 x M.2 3042/3052 Key B socket
- TPM 2.0 onboard
- PCIe x4 expansion
- Support +24VDC input, support ATX power mode
- Robot connectivity: YASKAWA, KUKA, ABB, FANUC, TM, UR
- R2M communication: Modbus TCP, TCP/IP
- R2C communication: OPC UA, MQTT
- Support ROS applications
- Supports AWS RoboMaker ROS applications
- Supports Intel OpenVINO Toolkit (optional)
- Supports AI inference with Intel® MovidiusTM X VPUs (optional)
- Robot connectivity: YASKAWA, KUKA, ABB, FANUC, TM, UR
- R2M communication: Modbus TCP, TCP/IP
- R2C communication: OPC UA, MQTT
- Support ROS applications
- Supports AWS RoboMaker ROS applications
- Supports Intel OpenVINO Toolkit (optional)
- Supports AI inference with Intel® MovidiusTM X VPUs (optional)
- Onboard Intel® Celeron® processor J1900 Quad Core, 2.42GHz
- 1 x HDMI display
- 3 x Intel® I210-IT GbE LAN ports; support WoL, teaming and PXE
- 2 x USB 2.0
- 1 x mini-PCIe socket for optional Wi-Fi/BT modules
- 1 x mini-PCIe socket for optional mSATA storage
- 1 x RJ45 COM serial port for RS232 signal
- Support -10°C to 60°C operating temperature
- Support 12V DC input
- NXP i.MX 8M Plus Cortex®-A53 quad core processor
- 1 x HDMI
- 1 x USB 3.0, 2 x USB 2.0
- 3 x COM
- 2 x GbE LAN ports
- 1 x Full size M ini PCIe for optional Wi Fi/BT/4G LTE (PCIe, USB 2.0 , SIM
- 1 x Internal M.2 (Key E) 2230 (USB 2.0, SDIO, UART)
- 1 x Internal M.2 (Key B) 3042/3052 (USB3.0, SIM)
- Modular rear I/O design for easy customization
- Support 9 30 V DC input
- Support EZ Mesh and Wi-Fi client router operation mode
- Selectable 2.4GHz/5GHz, 2x2 MIMO
- Support serial to Ethernet' serial to Wi-Fi and Ethernet to Wi-Fi
- Support Modbus/RTU to Modbus/TCP
- Built-in offline port buffer with 20MB of storage
- High immunity to Surge, ESD & EFT protection
- Up to 921.6Kbps baud rate for RS-232/422/485 transmissions
- Web-based configuration
- Support serial data log
- Support nCare remote configuration
- Wide DC input range with 12V-48V
- Wide operation temperature from -40°C~70°C
- Serial to LoRa converter
- Easy to set up and maintain
- Long distance ( up to 2,000 meters )
- Up to 255 Bytes per packet
- Receiving sensitivity: -137 dBm
- 5～24V & 5V Micro USB power supply (alternative)
- Broadcast mode (no pairing required)
- Secured AES encryption in wireless communication
- Full Mesh topology: robust wireless connectivity from ISA100/ WirelessHART field device coverage to Wi-Fi backbone
- Perfect triple play infrastructure: video surveillance via high-throughput Wi-Fi backbone ensures video transmission without compromising video performance
- Dual Wi-Fi Mesh path establishes better stability in backbone transmission
- Wide temperature range, high EMC immunity to Surge, ESD, and EFT
- Suitable for deployment in hazardous environments
- Incorporates power redundancy (DC and PoE)
- Distributed network topology provides a scalable infrastructure: easy integration and cost savings