IEC 61850-3 Substation Switches
- 16 10/100/1000Base-(T)X 8 100/1000 RJ-45/SFP combo ports 4 Gigabit SFP ports
- Advanced Cyber Security – DHCP Snooping IP Source Guard Dynamic ARP Inspection ACL L2/L3/L4
- Redundancy – MSR ITU-T G.8032 ERPS
- USB Firmware upgrade and configuration backup and restore
- IEEE 1588v2 PTP with HW time stamping
- Compliance with EN50121-4
- 16 10/100/1000Base-T(X) 8 100/1000 RJ-45/SFP combo ports 4 Gigabit SFP ports
- Advanced Cyber Security – DHCP Snooping IP Source Guard Dynamic ARP Inspection
- Redundancy – MSR SuperChain ITU-T G.8032 ERPS
- USB Firmware upgrade and configuration backup and restore
- IEEE 1588v2 PTP with HW time stamping
- 16 10/100/1000Base-T(X) 8 100/1000 RJ-45/SFP combo ports 4 Gigabit SFP ports
- Advanced Cyber Security – DHCP Snooping IP Source Guard Dynamic ARP Inspection
- Redundancy – MSR SuperChain ITU-T G.8032 ERPS
- USB Firmware upgrade and configuration backup and restore
- IEEE 1588v2 PTP with HW time stamping
- 24 100/1000Base-TX 4* 10Gigabit SFP ports
- Advanced Cyber Security – DHCP Snooping IP Source Guard Dynamic ARP Inspection L2/L3 Access
- Redundancy – MSR ITU-T G.8032 ERPS
- USB Firmware upgrade and configuration backup and restore
- Isolated redundant power inputs with dual DC power and one 110/220 VAC power
- Compliance with EN50121-4
- 16 10/100/1000Base-(T)X 8 100/1000 RJ-45/SFP combo ports 4 Gigabit SFP ports
- Advanced Cyber Security – DHCP Snooping IP Source Guard Dynamic ARP Inspection ACL L2/L3/L4
- Redundancy – MSR ITU-T G.8032 ERPS
- USB Firmware upgrade and configuration backup and restore
- IEEE 1588v2 PTP with HW time stamping
- Compliance with EN50121-4
-
IEC 61850-3 Substation Automation Switch, Layer 2
-
8 x RJ45, 10/100/1000 Mbit/s
-
4 x 100/1000 Mbit/s, SFP transceivers supported, Ethernet FX (LC)
- IEC 61850-3 Substation Automation Switch, Layer 3
- 8 x RJ45, 10/100/1000 Mbit/s
- 4 x 100/1000 Mbit/s, SFP transceivers supported, Ethernet FX (LC)
- 19" Managed Substation Automation Switch - High voltage version, layer 2
- 110 to 240 V AC/DC
- 4 x 100/1000 Mbit/s SFP transceivers supported, Ethernet FX (LC)
- 24 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45
- 19" Managed Substation Automation Switch - High voltage version, layer 3
- 110 to 240 V AC/DC
- 4 x 100/1000 Mbit/s SFP transceivers supported, Ethernet FX (LC)
- 24 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45
- 19" Managed Substation Automation Switch - Dual high voltage version, layer 2
- 110 to 240 V AC/DC
- 4 x 100/1000 Mbit/s SFP transceivers supported, Ethernet FX (LC)
- 24 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45
- Compliant with IEC61850-3 & IEEE1613
- Support dual power redundancy AC&DC
- Built-in MMS server based on IEC61850-90-4 switch data modeling for SCADA with monitoring and control
- Enhanced G.8032 ring protection < 20ms for single ring. Supports auto mode, enhanced mode, train mode, multi-VLAN and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 16MSTI / RSTP ; support MRP Ring
- Miss-wiring avoidance & node failure protection
- User-friendly UI, including auto topology drawing; Complete CLI
- Support LACP link aggregation, IGMP v3/router port, MLD snooping, DHCP server & DHCP Option82; Port-based DHCP distribution, Mac based DHCP server, DHCP Snooping, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3, TACACS+**, QinQ
- Protocol-based VLAN ; IPv4 Subnet-based VLAN
- USB port to backup, restore the configuration file and upgrade firmware