NIO 200 HAG

HazLoc ISA100/WirelessHART Gateway

Tính năng chính

  • Full Mesh topology: robust wireless connectivity from ISA100/ WirelessHART field device coverage to Wi-Fi backbone
  • Perfect triple play infrastructure: video surveillance via high-throughput Wi-Fi backbone ensures video transmission without compromising video performance
  • Dual Wi-Fi Mesh path establishes better stability in backbone transmission
  • Wide temperature range, high EMC immunity to Surge, ESD, and EFT
  • Suitable for deployment in hazardous environments
  • Incorporates power redundancy (DC and PoE)
  • Distributed network topology provides a scalable infrastructure: easy integration and cost savings

Giá sản phẩm: Liên hệ

Lượt xem 8

NIO 200 là điểm truy cập mạng phân tán mạnh mẽ, hỗ trợ chuẩn ISA100.11a, tích hợp công nghệ Mesh 802.11n. Với công nghệ ISA100.11a/WirelessHART, NIO 200 có thể thiết lập mạng Mesh hoàn chỉnh để đảm bảo truyền thông mạnh mẽ và đáng tin cậy cho các ứng dụng không dây công nghiệp quan trọng. Việc tích hợp cả công nghệ Mesh 802.11n và ISA100.11a/WirelessHART mang đến một cơ sở hạ tầng Mesh toàn diện, trải dài từ các thiết bị hiện trường đến mạng lưới Wi-Fi cốt lõi, do đó đảm bảo kết nối không dây mạnh mẽ. Sản phẩm được thiết kế để đáp ứng các yêu cầu chứng nhận CID2 và ATEX, đồng thời là giải pháp hoàn hảo cho việc giám sát và cảm biến dữ liệu quan trọng trong các nhà máy dầu khí, hóa chất,...

Environment
  • Operating temperature: -40~75°C (altitude: up to 3000m)
  • Storage temperature: -40~80°C
  • Humidity: 0% to 95% maximum (non-condensing)
  • Vibration: random 0.3g
Certifications

UL 60950-1; 60950-22
Radio approvals
- FCC Part 15.247, 15.407
- EN 300 328
- EN 301 893
EMI and susceptibility
- FCC Part 15.107, 15.109
- EN 301 489-1, -17

UL: Class I, Division 2, Groups A, B, C and D, T4
ATEX: Class I, Zone 2; Ex nA II, T4

I/O Ports

Wireless Radio

  • IEEE802.11a/n x 2, MIMO 2 x 2
  • IEEE802.15.4, 1 Tx, 1 Rx

Wi-Fi Frequency Ranges

  • USA: 5.15~5.25 GHz, 5.725~5.825 GHz
  • Europe: 5.15-5.25GHz, 5.47~5.725 GHz

RF Output Power: IEEE 802.11a

  • 802.11a
  • - 27 dBm with 2 antennas
  • 802.11n (HT20)
  • - 27 dBm with 2 antennas
  • 802.11n (HT40)
  • - 27 dBm with 2 antennas
  • * Note: The available RF output power will be given by certified power in different regions

Hardware

  • WAN: 10/100/1000 Base-TX MDI/MDIX
  • LAN: 10/100/1000 Base-TX MDI/MDIX

Ethernet compliant with:
- IEEE802.3/802.3u
- Hardware-based 10/100/1000, full/half, flow control, auto negotiation
Push buttons: 1 x reset/restore to default
LED:
- 2 x Ethernet
- 2 x 11an radio
- 1 x IWSN radio
- 1 x Power/Status
N-Type:
- 5 x N-type connector for NIO 200IDR/IAG/HAG
- 4 x N-type connector for NIO 200IDG

Safety Compliance

  • UL 60950-1; 60950-22
  • EN 60950, 2nd edition
  • IEC 60950, 2nd edition
  • IEC 61000-4-2 level 4 ESD immunity
  • IEC 61000-4-5 level 4 AC surge immunity
  • IEC 61000-4-4 level 4 electrical fast transient burst immunity

Wi-Fi Security (AP Mode)

  • WEP (64/128/152)
  • WAP/WPA2 mixed
  • WPA2-personal (PSK+CCMP/AES)
  • Hidden ESSID support
  • MAC address filtering (MAC ACL)
  • Station isolation

* Note: The AP function is to be quipped in 2nd phase stage.

System Management

  • nCare, web GUI management
  • SNMP V1/V2c/V3
  • Event log
  • Syslog information support
  • Configuration backup and restore
  • One-button-click to restore factory default setting
  • Firmware upgrade
  • SNMP V1/V2c/V3 client

High-Side Communication Interfaces

  • Monitoring and Control System (MCS)
  • MODBUS/CP
  • Gateway Services Access Point (GSAP) (only for NIO 200IAG/IDG)
  • HART-IP (only for NIO 200HAG)
Physical Characteristics
  • Wall/VESA/Pole mountable (pole mount kit is an optional accessory)
  • Wall/pole mountable
  • Dimension: 256mm x 226mm x 91mm
  • Weight: 2.5Kg
Hãng NEXCOM

DATASHEETS
Datasheet_NIO200Series.pdf
[ Datasheet_NIO200Series.pdf , 0.4MB , Dec.05.2025 ]
Resource
báo giá sản phẩm

Cảm ơn bạn đã tìm hiểu thông tin sản phẩm sau đây. Chúng tôi sẽ sớm liên lạc lại với bạn.(Các mục được đánh dấu * là bắt buộc)