VTC 1031/1031-C2

Intel Atom® 6413E Processor Fanless In-Vehicle Computer

Tính năng chính

  • Intel Atom® x6413E quad-core processor, 9W
  • Compact and fanless design
  • 5G NR and Wi-Fi 6/6E wireless communication options
  • Built-in U-blox M9N GNSS, optional dead reckoning support
  • Built-in 1 x CAN bus 2.0B (optional SAE J1939)
  • Wide range DC input from 9~36V
  • 2 x POE support, total 60W (VTC 1031-C2)
  • 1 x mini-PCIe + 2 x M.2 socket expansions
  • Optional AI accelerator M.2/mPCIe module
  • Certified by CE/UKCA/FCC/E13 mark

Giá sản phẩm: Liên hệ

Lượt xem 23

VTC 1031 trang bị bộ xử lý quad-core Intel Atom® x6413E tốc độ 1,5 GHz cải tiến mạnh mẽ về đồ họa và đa phương tiện. Nó cung cấp CAN 2.0B tích hợp, giao diện USB tùy chọn (SAE J1939) để chẩn đoán phương tiện và quản lý hành vi người lái, bộ thu GNSS tiên tiến hỗ trợ GPS+QZSS/Glonass/Galileo/Beidou và dead reckoning tùy chọn. Hơn nữa, để kết nối, nó cung cấp dữ liệu không dây WLAN (Wi-Fi 5/6/6E) và WWAN (LTE/5G NR). Để thuận tiện, có hai micro-SIM và một micro-SIM với thiết kế truy cập bên ngoài, cho phép người dùng dễ dàng truy cập vào thẻ micro-SIM. Được trang bị mô-đun tăng tốc AI M.2/mPCIe tùy chọn, VTC 1031 còn hoạt động như một nền tảng điện toán biên AI đáng tin cậy, cung cấp các giải pháp AI cải tiến trên xe. Với khung máy chắc chắn, không quạt và nhỏ gọn, chiếc máy tính không quạt này có thể được lắp đặt dễ dàng.

VTC1031-C2 cung cấp các chức năng IEEE802.3af/at dual-PoE và phù hợp với hầu hết các thiết bị PoE. Điều này bao gồm kết nối với các IP không dây và camera IP. Hơn nữa, một đầu ra 12VDC bổ sung có thể được cung cấp cho màn hình bên ngoài thông qua việc bố trí dây nguồn dễ dàng.

VTC 1031 là máy tính không quạt linh hoạt trên xe, đáp ứng các nhu cầu khác nhau về ứng dụng viễn thông như gateway không dây, thông tin giải trí, quản lý đội xe, hệ thống điều phối, điện toán biên AI và giám sát video di động.

* Thông tin đặt hàng

VTC 1031 (P/N: 10V00103100X0)
Intel Atom® x6413E processor 1.5GHz with 4GB DDR4, U-blox NEOM9N GNSS module, 1 x CAN 2.0B, 1 x VGA output, 1 x HDMI output, 1 x internal SSD tray, 2 x LAN RJ45, 1 x mini-PCIe slot, 2 x M.2 slots, 2 x micro-
SIMs, 1 x USB 3.2 Gen 2, 3 x USB 2.0, 1 x full RS232/422/485, 1 x RS232 Tx/ Rx, 2 x RS485, 5 x DI & 4 x DO

VTC 1031-C2 (P/N: 10V00103101X0)
Intel Atom® x6413E processor 1.5GHz with 4GB DDR4, U-blox NEOM9N GNSS module, 1 x CAN 2.0B, 1 x VGA output, 1 x HDMI output, 1 x internal SSD tray, 2 x LAN RJ45, 1 x mini-PCIe slot, 2 x M.2 slots, 2 x micro-SIMs, 1 x USB 3.2 Gen 2, 3 x USB 2.0, 1 x full RS232/422/485, 1 x RS232 Tx/ Rx, 2 x RS485, 5 x DI & 4 x DO, 2 x PoE RJ45

 

Front I/O Interface
  • 6 x LED indicators (including 1 x programmable LED)
  • 1 x USB 3.2 Gen 2 type A (5V/0.9A)
  • 1 x USB 2.0 type A (5V/0.5A)
  • 1 x Externally accessible micro-SIM card sockets with cover
  • 1 x Reset button
  • 1 x Power button
  • 1 x DB9 (COM) for full RS232/422/485
  • 1 x Mic-in, 1 x Line-out
  • 1 x DB9 for Expansion Port (optional)
  • 2 x RJ45 PoE, including 2 x PoE LED light (VTC 1031-C2)
  • 4 x SMA connector holes for WWAN (VTC 1031)
Rear I/O Interface
  • 1 x HDMI
  • 1 x VGA
  • 1 x LAN (LAN1) RJ45, 10/100/1000/2500 Mbps
  • 1 x LAN (LAN2) RJ45, 10/100/1000 Mbps
  • 2 x USB 2.0 type A (5V/0.5A)
  • 1 x DB26 (MULTI PORT)

- 1 x Isolated CANBus 2.0B
- 1 x RS232 Tx/ Rx
- 1 x GNSS Speed/Direction
- 5 x DI and 4 x DO
- 2 x RS485
- 12V/ 2A DC output
- GND

  • 1 x 3-pin terminal block for power/ignition input
  • 1 x SMA connector for GNSS
  • 2 x SMA connector holes for WWAN
  • 3 x RP-SMA connector holes for WLAN
Expansion
  • 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
  • 1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0)
  • 1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
GNSS and Onboard Sensor
  • 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou
  • Optional M8U/M8L modules with dead reckoning available
  • 1 x 3D accelerometer and 3D gyroscope
LAN / PoE
  • 1-Port LAN RJ45, 10/100/1000/2500 Mbps Ethernet, Intel® Ethernet Controller I225-IT (support WOL)
  • 1-Port LAN RJ45, 10/100/1000 Mbps Ethernet, Marvell Ethernet PHY 88E1512
  • 2-Port LAN RJ45, 10/100/1000 Mbps Ethernet, PoE 802.3af/at, max 60W (VTC 1031-C2)
Security
  • TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
Power
  • Power input 9~36VDC
  • Cranking voltage: 6V~9V (< 30 seconds)
  • Reverse protection, OCP & UVP
  • Selectable boot-up & shut-down voltage for low power protection by software
  • Setting 8-level power on/off delay time by software10~255 seconds WDT support, setup by software
  • SDK (Windows/Linux) including utility and sample code
Environment
  • Operating temperatures: -40°C to 70°C (w/ industrial SSD) with air flow
  • Storage temperatures: -40°C to 85°C
  • Relative humidity: 90% (non-condensing)Vibration (random)

- 2g@5~500 Hz (in operation, SSD)

  • Vibration (SSD)

- Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity test

  • Shock (SSD)

- Operating: MIL-STD-810H, Method 516.8, Procedure I, functionalshock=40g
- Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g

Certifications
  • CE
  • UKCA
  • FCC Class A
  • E13 mark
Physical Characteristics
  • Dimensions: 180mm (W) x 180mm (D) x 50mm (H)
  • Weight: VTC 1031: 1.91kg; VTC 1031-C2: 2.0kg
Video Output
  • 1 x HDMI 1.4b up to 3840 x 2160@30Hz
  • 1 x VGA port 1920 x 1200@60Hz

DATASHEETS
VTC1031_1031-C2.pdf
[ VTC1031_1031-C2.pdf , 0.64MB , Apr.17.2024 ]
Resource
báo giá sản phẩm

Cảm ơn bạn đã tìm hiểu thông tin sản phẩm sau đây. Chúng tôi sẽ sớm liên lạc lại với bạn.(Các mục được đánh dấu * là bắt buộc)