NIFE 300

6th Gen Intel® Core™ i7/i5/i3 LGA1151

Tính năng chính

  • Support 6th Gen Intel® Core™ i7/i5/i3 LGA1151 socket type processors
  • Intel® Q170 PCH
  • 1 x DVI-D, and 1x HDMI for dual independent display support
  • 3 x Intel® GbE LAN ports; support WoL, teaming and PXE
  • 4 x USB 3.0, 2 x USB 2.0 and 2 x RS232/422/485 auto
  • 1 x Front access 2.5”SATA HDD tray
  • 2 x mini-PCIe socket support optional modules and mSATA device
  • 1 x External CFast socket and 1 x SIM card socket
  • Support +24VDC input; support ATX power mode

Giá sản phẩm: Liên hệ

Lượt xem 53

Giải pháp bộ điều khiển IoT dựa trên PC NIFE 300 tăng tốc quá trình di chuyển các hệ thống tự động hóa sang các hệ thống vật lý không gian mạng để sản xuất thông minh. Được tăng cường bởi bộ xử lý Intel® Core™ i5-6500TE và i7-6700TE (trước đây có tên mã Skylake-S), kiến trúc mở của NIFE 300 có khả năng tương tác cao để cung cấp cơ sở hạ tầng, mạng truyền thông và công cụ lập trình thống nhất cho các nhà máy và văn phòng công ty nâng cao hiệu quả và sự linh hoạt trong sản xuất.

Bộ xử lý Intel® Core™ thế hệ thứ 6 sử dụng quy trình 14nm của Intel đã tích hợp Đồ họa HD Intel® và các giao diện thế hệ mới nhất bao gồm DDR4 2133. Hiệu suất vượt trội của NIFE 300 phù hợp với các ứng dụng chuyên sâu về đồ họa và điện toán như điều khiển chuyển động và thị giác máy, đồng thời hỗ trợ 4K2K cho phép giao diện người máy (HMI) hiển thị các chi tiết tinh tế của các chi tiết gia công và mô phỏng 3D các quy trình làm việc.

Bằng cách sử dụng các thư viện có chức năng chuyển động và logic có thể tái sử dụng, các sơ đồ điều khiển có thể được phát triển với ít nỗ lực lập trình hơn để triển khai nhanh bộ điều khiển SoftPLC và IoT.

 

Processor
  • Support 6th Generation Intel® Core™ i7/i5/i3 LGA socket type processors

- Core™ i7-6700TE, Quad Core, 2.4GHz, 8M Cache (maximum frequency 3.4GHz if turbo boost enabled)
- Core™ i5-6500TE, Quad Core, 2.3GHz, 6M Cache (maximum frequency 3.3GHz if turbo boost enabled)
- Core™ i3-6100TE, Quad Core, 2.7GHz, 4M Cache (no turbo boost)
- Pentium G4400TE, Dual Core, 2.4GHz, 3M Cache (no turbo boost)
- Celeron® G3900TE, Dual Core, 2.3GHz, 2M Cache (no turbo boost)

Memory
  • 2 x DDR4 2133 SO-DIMM socket, support up to 16GB
Storage
  • 1 x CFast (SATA 3.0)
  • 1 x 2.5” HDD (external, SATA 3.0)
  • 1 x 2.5” HDD (internal, SATA 3.0)
  • 1 x mSATA (via internal mini PCIe socket)
Front I/O Interface
  • 1 x ATX power on/ off switch
  • 1 x HDMI and 1 x DVI-D
  • 4 x USB 3.0 ports (900mA per each)
  • 2 x USB 2.0 ports (500mA per each)
  • 1 x Line-out and 1 x Mic-in
  • 2 x Antenna holes for WI-FI/ GSM
  • 1 x Front access 2.5” HDD tray
  • 1 x Mini-PCIe expansion support optional modules
  • 2 x RS232/422/485 auto with 2.5KV Isolation
  • 3 x Intel® I210IT GbE LAN ports, support WoL, teaming and PXE
Rear I/O Interface
  • 1 x 3-pin remote switch
  • 1 x CFast expansion
  • 1 x SIM card
Display
  • Dual independent display
  • HDMI + DVI-D
Top I/O Interface
  • 1 x 3-pin remote switch
  • 1 x CFast expansion
  • 1 x SIM card
Front I/O Interface Status LEDs
  • 1 x battery/ 1 x C-Fast LEDs
  • 4 x GPO status/ 2 x Tx/ Rx LEDs
  • 1 x power/ 1 x HDD access LEDs
Expansion
  • NIFE 300: no expansion
  • NIFE 300P2: two PCI expansion slots

- Add-on card length: 180mm max
- Power consumption: 10W/slot max

  • NIFE 300P2E: one PCI expansion slot, and one PCIe x8 expansion slot

- Add-on card length: 180mm max
- Power consumption: 10W/slot max

  • NIFE 300P3: two PCI expansion slots and one PCIe x8 expansion slot

- Add-on card length: 180mm max
- Power consumption: 10W/slot max

  • NIFE 300E3: one PCIe x8 and two PCIe x4 expansion slot

- Add-on card length: 180mm max
- Power consumption: 10W/slot max

  • NIFE 300E16: one PCIe x16 expansion slot

- Add-on card length: 180mm
- Power consumption: 30W/slot max

I/O Interface (Front)
  • 1 x ATX power on/ off switch
  • 1 x HDMI and 1 x DVI-D
  • 4 x USB 3.0 ports (900mA per each)
  • 2 x USB 2.0 ports (500mA per each)
  • 1 x Line-out and 1 x Mic-in
  • 2 x Antenna holes for WI-FI/ GSM
  • 1 x Front access 2.5” HDD tray
  • 1 x Mini-PCIe expansion support optional modules
  • 2 x RS232/422/485 auto with 2.5KV Isolation
  • 3 x Intel® I210IT GbE LAN ports, support WoL, teaming and PXE
Power
  • AT/ ATX power mode (default with ATX power mode)
  • Power input: typical +24VDC +/- 20%, with reverse polarity protection
  • Power adapter: optional AC to DC power adapter (+24Vdc, 120W)
Environment
  • Operating Temperature:

Ambient with air flow: -10°C to 60°C
according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)

  • Storage Temperature: -20°C to 85°C
  • Relative Humidity: 10% to 93% (non-condensing)
  • Shock Protection:

- HDD: 20G, half sine, 11ms, IEC60068-27
- CFast: 50G, half sine, 11ms, IEC60068-27

  • Vibration protection w/HDD condition:

- Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
- Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6

Certifications
  • CE approval

- EN61000-6-2
- EN61000-6-4

  • FCC Class A
  • LVD
Physical Characteristics
  • Dimensions

- NIFE 300: 90 mm(W) x 185mm (D) x 251mm (H)

- NIFE 300P2: 155 mm(W) x 185mm (D) x 251mm (H)

- NIFE 300P2E: 155 mm(W) x 185mm (D) x 251mm (H)

- NIFE 300E16: 155 mm(W) x 185mm (D) x 251mm (H)

- NIFE 300P3: 175 mm(W) x 185mm (D) x 251mm (H)

- NIFE 300E3: 175 mm(W) x 185mm (D) x 251mm (H)

  • Construction: Aluminum and metal chassis with front access design

 

Ordering Information
  • NIFE 300 system (P/N: 10J70030000X0)
  • NIFE 300P2 system (P/N: 10J70030001X0)
  • NIFE 300P2E system (P/N: 10J70030002X0)
  • NIFE 300P3 system (P/N: 10J70030003X0)
  • NIFE 300E3 system (P/N: 10J70030008X0)
  • NIFE 300E16 system (P/N: 10J70030004X0)

  24V, 120W AC to DC power adapter w/o power cord (P/N: 7400120029X00)

Hãng NEXCOM
CPU Support Intel® Core™ i3/i5/i7
Operating System Windows 7, Windows 10

DATASHEETS
NIFE300.pdf
[ NIFE300.pdf , 0.58MB , Mar.06.2024 ]
Resource
báo giá sản phẩm

Cảm ơn bạn đã tìm hiểu thông tin sản phẩm sau đây. Chúng tôi sẽ sớm liên lạc lại với bạn.(Các mục được đánh dấu * là bắt buộc)